Single Sphere Rubber Expansion Joint
Introduction of rubber expansion joint
Single Sphere Rubber Expansion Joints are designed for piping systems to absorb pipe movements,
relieve stress, reduce system noise/vibration, compensate for misalignment/offset and to protect rotating
mechanical equipment against start-up surge forces.
The molded single sphere and twin sphere designed bellows are inherently stronger than the conventional hand-built style spool arch type.
Internal pressure within a “sphere” is exerted in all directions, distributing forces evenly over a larger area. The spherical design “flowing arch” reduces turbulence
and sediment buildup.
<img alt="2.jpg" height="296" ori-height="234" ori-width="570" src="http://hz01.i.aliimg.com/img/pb/837/053/731/731053837_495.jpg" width="788" />
<img alt="3.jpg" height="310" ori-height="237" ori-width="597" src="http://hz00.i.aliimg.com/img/pb/090/055/731/731055090_310.jpg" width="772" />
Main Connection Dimensions of rubber expansion joint
rubber expansion joint <img alt="2.jpg" height="66" ori-height="42" ori-width="569" src="http://hz01.i.aliimg.com/img/pb/620/071/731/731071620_297.jpg" width="756" />
Note:
a.Supply range can be up to DN3000, detailed data can be offered upon request.
b.Control units must be used when piping is not properly anchored.
c.Movements shown in the above table are non-concurrent.
d.Flange drilling is based on DIN PN16, ANSI 150/250/300 lbs, BS PN10, JIS 10K and so on.
Production process of rubber expansion joint
<img alt=".jpg" height="459" ori-height="411" ori-width="600" src="http://hz01.i.aliimg.com/img/pb/392/144/731/731144392_708.jpg" width="741" />
Packing of rubber expansion joint
<img alt="1.jpg" height="573" ori-height="542" ori-width="594" src="http://hz01.i.aliimg.com/img/pb/510/146/731/731146510_793.jpg" width="726" />
Factory of rubber expansion joint
<img alt="2.jpg" height="367" ori-height="313" ori-width="600" src="http://hz01.i.aliimg.com/img/pb/005/078/731/731078005_051.jpg" width="751" />
Welcome to our factory!